ID Spa and Pool Test Kits

Used by Hotels, Leisure Centres and all pool and spa professionals.
These kits are so acurate they are used by Water Authorities for testing the balance in your drinking water.
Ph, Chlorine and Bromine Levels.

3 in 1 Easy Dip swimming pool test strips offer the user more than just another test strip. They offer accurate results that you can rely on. The 3 in 1 Easy Dip test strip has been specially designed to work in both pools and spas in both chlorine and bromine chemical treatment systems. Economically priced, the 3 in 1 Easy Dip test strips are the ideal choice for the pool or spa owner.
Each 10 strips of 50 are vacuum sealed in foil to ensure they last so much longer and do not get wet!

5 in 1 Easy Dip pool test strips are part of the complete pool & spa testing range from Pool Test Online. Measuring for five of the most important pool & spa parameters, the 5 in 1 pool test strip is ideally suited for the swimming pool or spa owner who is concerned with proper pool and spa maintenance. Each 10 strips of 50 come in vacuum packed foil to ensure they last so much longer and do not get wet.


1. Free Chlorine: 0 - 5ppm
2. Total Bromine: 0 - 11 ppm
3. Total Alkalinity: 0 - 240 ppm
4. pH: 6.8 - 8.2
5. Total Hardness: 40 - 1000 ppm
6. Cyanuric acid levels: 0 - 150 ppm

No more test strips, no more messy, fiddly ph tablets - the quickest, simplest and most accurate method for measuring the pH values of your spa.
Designed to be simple and effective, this meter is suitable for swimming pool or hot tub testing.

Measurement Range - pH 0-14
Resolution - 0.1pH
Precision - +/- 0.1pH
Calibration Type - manual
Auto Temperature Compensation - None
Operating Temperature - 0-50oC

As many as 60% of home spa ozonators are either producing insufficient ozone, or none at all. Bubbles in the ozone jet water stream do not indicate the ozonator is working. UV light ozonators require new light tubes every 6-12 months and CD chip ozonators require a new chip every 12-24 months. Even then, CD ozonators can only take one replacement chip before the complete unit requires replacing.

Spa ozone testing takes 30 seconds. If the test shows no ozone is being produced (test kit media stays blue) the test kit can be used again within a year.